Kenmore 790.75609, 790.75604 Setting Oven Controls, To Change the Minute Timer while it is in use

Models: 790.75602 790.75609 790.75604

1 24
Download 24 pages 44.48 Kb
Page 10
Image 10
Setting Oven Controls

Setting Oven Controls

\,

Note: The time of day must first be set in order to operate the oven.

TO Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Press _.

2. Within 5 seconds, press and hold the ,A, or v

until the correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

TO Set the Minute Timer:

1.Press

2.Pressthe _ to increase the time in one minute increments. Press and hold the _ to increase the fime in l Ominute

increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you press the v first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4.When the set time has run out, the timer will beep 3 times. Itwill then continue to beep 3 times every 60 seconds until is pressed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any otherfunction, the minute timerwill be shown in the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the /_. or v

to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out: Press

10

Page 10
Image 10
Kenmore 790.75609, 790.75604, 790.75602 manual Setting Oven Controls, To Change the Minute Timer while it is in use