ENSURING PROPER AiR CiRCULATiON

In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections.

o Cool air enters the freezer through the vents located at the top of the compartment and exits through the vents located behind the freezer drawers.

o Cool air from the freezer section enters the fresh food section through vents located at the top of the compartment. The air moves down throughout the compartment and exits through the vents located behind the crisper drawers.

PRIOR TO USE

1.Clean your refrigerator thoroughly and wipe off dust accumulated during shipping.

2.Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment.

3.Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.

CONTROL PANEL FEATURES

"Do not block any of these vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur.

iMPORTANT:

Because air circulates between both sections, any odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors.

To prevent odor transfer and dried out food, wrap or cover foods tightly. (See the Food Storage Guide section for details.)

NOTE: If you close the

refrigerator door, you may see the freezer door

open and close again due to pressure from internal air flow.

REFRIGERATOR AND FREEZER CONTROLS

It is recommended to maintain the temperature of 37°F (3°C) in the refrigerator compartment and 0°F (-18°C)in the freezer compartment. To adjust temperatures, press Fddge Temp graphic and Freezer Temp graphic.

The lower the number, the colder the compartment will be.

NOTE: The refrigerator temperature can be modified from 33°F to 46°F (0°C to 8°C). The freezer temperature can be modified from -6°F to 8°F (-21°C to -13°C).

To change temperature unit from Fahrenheit to Celsius

or from Celsius to Fahrenheit press and hold Fddge Temp and Freezer Temp buttons.

Display Off Mode

oWhen the refrigerator is in the Display Off Mode, the display will remain off until a door is opened or a button is

pressed. Once on, the display will remain on for 20 seconds.

oTo deactivate the Display Off Mode, press and hold the Freezer Temp and Ultra Ice buttons for 5 seconds until the tone sounds. Repeat this procedure to reactivate the Display Off Mode.

16

Page 16
Image 16
Kenmore 795.5103 Ensuring Proper AiR CiRCULATiON, Prior to USE, Control Panel Features, Refrigerator and Freezer Controls