Reinstallingtheright (refrigerator)door

5.Reconnectthewatertubesbyinsertingthetubesinto

 

theconnectors,

i i

Type 1

,

Type 2

 

1.Place the door onto the lower hinge pin.

2.Fit top hinge (4) over hinge lever latch (5) into place. Rotate lever (3) counterclockwise to secure

hinge.

NOTE: Regardless of hinge lever type, reinstallation process is the same.

3.Hook tab on switch side of corner under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1).

Reinstalling the left (freezer) door

#,

(1)\

(4).

1.Feed the water tubes through the lower hinge pin and place the door onto the lower hinge pin.

2.Fit top hinge (6) over hinge lever latch (7) and into place. Rotate lever (5) clockwise to secure hinge.

NOTE: Regardless of hinge lever type, reinstallation process is the same.

3.Install the grounding screw (4) and connect all the wire harnesses (3).

4.Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1).

10

Page 10
Image 10
Kenmore 795.5103 manual Reinstallingtheright refrigeratordoor