
9.Gentlypushdownon theFEEDHANDLESuntilthe headraisesupwardsasfarasit willgo.
DONOTRELEASEFEEDHANDLE.
10,TIGHTENTHEHEADLOCKHANDLEANDTHE
QUILLLOCKHANDLE.
11.HOLDontotheFeedHandleandUNLOCKthequill
lockhandle.
12.LetthequillreturntotheUPpositioninthehead,
13TIGHTENTHEQUILLLOCKHANDLE..
Repeatsteps3 thru 10until theheadis raisedto the desiredposition.PositionHEADSUPPORTCOLLAR underneaththeheadandtightenthebolts.
CAUTION:Do not raise the head above the top of the coBumn.
HEAD
LOCK
HANDLE
LOCK
HANDLE
HEAD EVEN
WITH TOP
OF COLUMN
SUPPORT
COLLAR
INSTALLING MOTOR PULLEY
When using a double shaft motor, remove the KEY from the 5/8 in. dia, shaft.
2,
3_
Using a 5/32 in. setscrew wrench, UNSCREW the
setscrew in the pulley so that it is clear of the
KEYWAY (GROOVE).
Place the pulley on the shaft. Make sure it slips on
EASILY ... don't FORCE it. Remove any burrs in the pulley or on the shaft if any.
Position the pulley so that the KEYWAYS in the shaft and in the pulley line up; and the small end of the pulley is about 1/16 of an inch away from the motor,