getting to know your drill press
To turn drill ON ..
Insert finger under switch lever and pull.
TO turn drill OFF ... Push lever in.
In | an | emergency; | ...thedrill |
| bit BINDS | ...STALLS | .. | |
STOPS | . .. or tends | to | tear the workpiece | loose . .. you | ||||
can | QUICKLY | turn | the | drill | OFF by hitting the | switch | ||
with the palm of your hand.
TO lock switch in OFF position ... hold switch IN with one hand ... REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS NOT IN USE ... REMOVE KEY AND KEEP IT IN A SAFE
PLACE ... ALSO ... IN THE EVENT OF A POWER FAILURE (ALL OF YOUR LIGHTS GO OUT) TURN SWITCH OFF ... LOCK IT AND REMOVE THE KEY. THIS WILL PREVENT THE DRILL PRESS FROM STARTING UP AGAIN WHEN THE POWER COMES
BACK ON.
_2 REMOVING THE CHUCK.
7.Insert a piece of 5/16 in. dia. steel rod in one of the holes in the chuck body.
2= Insert the CHUCK KEY into one of the holes in the collar ,., turn it in the direction of arrow
until LOOSE. Continue to turn it until the chuck is released.
I HOLD
f
J
LOCKING
COLLAR
CHUCK SLEEVE
CHUCK KEY
I N. ROD
OR DRILL
\
14
