DOOR ALIGNMENT

Before adjust the doors, remove the base grille. See BASE

GRILLE INSTALLATION for reference.

First select your adjusting tool, it could vary.

Type 1

Adjusting tool: fiat blade screwdriver

If the freezer compartment door is lower than the refrigerator

compartment door, level them by inserting a flat blade

screwdriver into the groove of the left leveling leg and rotating it clockwise.

Left leveling

legHeight difference

Type 2

Adjusting tools: wrench s/16"(8 ram] and wrench 3.4" (19 ram)

Height difference

)I...........................

Keeper nut

Wrench

Adj!

hinge;_w__"--F

Using a 3_" (19 mm) wrench, turn the keeper nut clockwise to loosen the keeper nut. Using a s/1J' (8 mm) wrench, turn the

adjustment hinge pin clockwise or counterclockwise to level

the refrigerator and freezer door.

After setting the level door, turn the keeper nut

counterclockwise to tighten.

• /

If the freezer compartment door is higher than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise.

[] CAUTION: Do not overtight the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of 1/2" (12.7 ram)).

AFTER LEVELING THE DOOR HEIGHT

Make sure the front leveling legs are completely touching the floor.

Height

Right leveling leg

difference

:J

12

Page 11
Image 11
Kenmore 795.5131 manual Door Alignment, Adjusting tool fiat blade screwdriver