ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, cool air enters through the refrigerator of the freezer section and moves up. Most of the air then flows
through the freezer section vents and recircuiates under the
freezer floor. The rest of the air enters the refrigerator section through the top vent.
*Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur.
IMPORTANT:
Because air circulates between both sections, any odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate
odors. To prevent odor transfer and dried out food, wrap or cover foods tightly. (See the
Food Storage Guide
section for details.)
NOTE: If you close the
refrigerator door, you may see the freezer door open and close again due to pressure from internal air flow.
PRIOR TO USE
1.Clean your refrigerator thoroughly and wipe off: dust accumulated during shipping.
2.Install accessories such as ice cube bin, drawers, shelves,
etc., in their proper places. They are packed together to prevent possible damage during shipment.
3.Let your refrigerator run for at least 2 or 3 hours before puffing food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
(Identify your Control type)
Type ]
Type 2
REFRIGERATOR AND FREEZER CONTROLS
It'srecommended to maintain the initial temperatures setting (middle) by pressing Fridge Temp graphic and Freezer Temp graphic.
NOTE: When changing control settings, waif 24 hours before making additional adjustments. After 24 hours, adjust the compartments temperatures as desired. The more lit bars, the colder the refrigerator and freezer will be. See Figure ] for
reference.
Figure 1
Display Off Mode
The display lights up and stays lit when the refrigerator is plugged in for 20 seconds. All the display lights go off: except the dispenser icon selected (crush, water or cube), and the display only lights when door is opened or display button is pressed. The display will turn off: 20 seconds after the door is closed or the display button is pressed. You can change
the display to always ON by pressing the Freezer Temp and Ultra Ice buttons at the same time for 5 seconds. A tone will
sound indicating that the display is ON ( Display Off: Mode
Deactivated). To return to Display Off: Mode, press the same two buttons for 5 seconds.
..... ULTRA ICE
Press this button once to activate increased ice making function. The ULTRA ICE icon on the display
panel will illuminate when activated. The Ultra Ice function runs the freezer compartment at the coldest settings for a 24 hour period to increase ice making. Press the button again to cancel the Ultra Ice function.
16
