LEVELING THE REFRIGERATOR DOOR
Place JeveJ on top of the refrigerator as shown below.
HANDLE REMOVAL (TYPE 1) (identify your handle type)
NOTE: It is ALWAYS recommended to remove the refrigerator doors when it is necessary to move the refrigerator through a
narrow opening. If necessary, follow the directions below to remove the door handles.
"Loosen the set screws with a _32" (2.38 mm) Ailen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or moved, use a 1/4" (6.35 ram) AHen wrench.
If your refrigerator is not level, insert a fiat blade screwdriver into the grooves of the leveling legs (shown in picture below).
Rotate legs clockwise to raise or counterclockwise to lower the front of the refrigerator.
Mounting fasteners
"'. | Set screw |
Left leveling leg | Right leveling leg |
|
wrench
Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope 1/4" (6.35 rnm) to 1/2" (12. 7 ram) from front to back.
Then level the refrigerator from side to side.
9
