Kenmore 795.7205 manual Electrical Shock Hazard, Light Bulb Replacement, Power Interruptions

Models: 795.7205

1 47
Download 47 pages 22.36 Kb
Page 34
Image 34
LIGHT BULB REPLACEMENT

LIGHT BULB REPLACEMENT

Electrical Shock Hazard

Before replacing a Compartment Lamp, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.

NOTE: The refrigerator and freezer compartment

lights have LED interior lighting, and service should be performed by a qualified technician.

POWER INTERRUPTIONS

1.if the power will be out for 24 hours or less, keep all

refrigerator doors closed to help foods stay cold and frozen.

2.If the power will be out for more than 24 hours, remove all frozen food and store it in a frozen food locker.

WHEN YOU GO ON VACATION

If you choose to leave the refrigerator on while you are away, follow these steps to prepare your refrigerator before you leave.

1.Use up any perishables and freeze other items.

2.Turn off the icemaker and empty the ice bin.

If you choose to turn the refrigerator off before you leave,

follow these steps.

1.Remove all food from the refrigerator.

2.Depending on your model, set the thermostat controt

(refrigerator control) to OFF. See the Setting the Controls section.

3.Clean the refrigerator, wipe it and dry well.

4.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.

WHEN YOU MOVE

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1.Remove all food from the refrigerator and pack all frozen food in dry ice.

2.Unplug the refrigerator.

3.Clean, wipe and dry thoroughly.

4.Take out all removable parts, wrap them well and tape them together so they do not shift and rattle

during the move. Refer to the Using your Refrigerator section for removable instructions.

5.Depending on the model, raise the front of the refrigerator so it rolls easier OR screw in the leveling legs all the way so they do not scrape the floor. See the Door Closing section.

6.Tape the doors shut and tape the power cord to the refrigerator cabinet.

When you get to your new home, put everything back and refer to the Refrigerator Installation section for preparation instructions.

34

Page 34
Image 34
Kenmore 795.7205 manual Electrical Shock Hazard, Light Bulb Replacement, Power Interruptions, When You Go On Vacation