HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER

IMPORTANT: To avoid possible injury or product or property damage, you will need two people to perform the following instructions.

1. Removing Pullout Drawer

With both hands, hold both sides of the door and pull it up to separate it from the rails.

Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system. (If you tilt the door, it will be easier.)

S

Press both hangers with your thumbs

to lift it up.

 

 

• With both hands, hold the center bar and push it in to let

Separate the left and right rail cover

both rails fitted simultaneously.

Remove the screws(2) of the rail on both sides.

J

CAUTION: When you remove the drawer, do not hold the handle. If it may come off and it could cause personal injury.

CAUTION: When laying the drawer down, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.

13

Page 13
Image 13
Kenmore 795.7756, 795.7757 manual HOW to Remove and Install the Pullout Drawer, Removing Pullout Drawer