DURABASE
1.To remove the Durabase, push it back to the end as much as possible. Tilt up the front of the Durabase and pull straight out.
2.To install, insert the Durabase in rail assembly.
DURABASE DIVIDER
The Durabase divider allows you to organize the Durabase area into sections.
1.To remove, pull divider staight up.
2.To install, hook top corners of divider over top edge of durabase.
_i, WARNING: When the divider of the freezer drawer is
removed, children may crawl inside.
PULL OUT DRAWER
To separate the drawer, push the front left and right hooks in O direction to pull up and remove.
Then gently lift the gear part of rear left and right side of the drawer and pull it out in ® direction.
To install, reposition the gear part of rear left and right side of the drawer after pulling out both rails as much as possible, and gently push down both left and right side while checking the hook on the front part.
j_
25
