2. Reinsalling the Refrigerator Door
•Right Door
1.Lower the door onto middle hinge pin (10).
2.Fit top hinge (8) over hinge lever latch (9) and into place. Insert hinge lever (7) under lever latch. Rotate lever counterclockwise to secure hinge.
3.Install the grounding screw (6) and connect the three wire harnesses (5).
4.Connect door switch wire harness (2).
5.Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (3) into place. Insert and tighten cover screw (1).
• Left Door
1.Lower the door onto middle hinge pin (10).
2.Fit top hinge (8) over hinge lever latch (9) and into place. Insert hinge lever (7) under lever latch. Rotate lever clockwise to secure hinge.
3.Install the grounding screw (6) and connect the three wire harnesses (5).
4.Connect door switch wire harness (2).Push the water supply tube into the hall on the top case and pull it out on the backplate.
5.Insert the water supply tube (4) into the connector tube until you see only one scale mark. (Fully insert the tube over 5/8"(15mm)).
6.Hook tab on door switch side of cover (3) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1).
Correct
Incorrect
12
