Banner L-GAGE manual WORLD-BEAM QS18U Specifications, Measurement & Inspection

MEASUREMENT & INSPECTION

	WORLD-BEAM®QS18U Specifications
Sensing Range	50 to 500 mm
Sensing Beam	See charts EBPC-6 and EBPC-7 on pages 513-514.
Supply Voltage	12 to 30V dc (10% max. ripple); 25 mA max. (exclusive of load)
Ultrasonic Frequency	300 kHz, rep. rate 7.5 milliseconds
Supply Protection Circuitry	Protected against reverse polarity and transient voltages
Output Protection	Protected against short circuit conditions
Delay at Power-Up	300 milliseconds
Output Configurations	Solid-state switch conducts when target is sensed within sensing window;
	One NPN (current sinking) or one PNP (current sourcing), depending on model.
Temperature Effect	Non-encapsulated models: ± 0.05% per ° C from -20° to +50° C, ± 0.1% per ° C from +50° to +60° C
	Encapsulated models: ± 0.05% per ° C from 0° to +60° C, ± 0.1% per ° C from -20° to 0° C
Repeatability	0.7 mm
Hysteresis	1.4 mm
Output Ratings	100 mA max.
	OFF-state leakage current: less than 10 µA (sourcing); less than 200 µA (sinking)
	NPN ON-state saturation voltage: less than 1.6V @ 100 mA
	PNP ON-state saturation voltage: less than 2.0V @ 100 mA
Output Response Time	15 milliseconds
Minimum Window Size	5 mm
Adjustments	Sensing window limits: TEACH-Mode programming of near and far window limits may be set using
	the push button or remotely using TEACH input.
Indicators	Range Indicator (Red/Green)	Teach/Output Indicator (Yellow/Red)
	Green—Target is within sensing range	Yellow—Target is within taught limits
	Red—Target is outside sensing range	OFF—Target is outside taught window limits
	OFF—Sensing power is OFF	Red—Sensor is in TEACH mode
Construction	Housing: ABS	Push-Button Housing: ABS
	Push Button: TPE	Lightpipes: Polycarbonate
Environmental Rating	Leakproof design, rated IEC IP67 or IP68; NEMA 6P, depending on model
Connections	2 m or 9 m 4-conductor PVC jacketed attached cable, or 4-pin Euro-style integral QD (Q8), or 4-pin
	Pico-style integral QD (Q7), or 4-pin Euro-style 150 mm pigtail QD (Q5), or 4-pin Pico-style 150 mm
	pigtail QD (Q), depending on model. See pages 411 and 412.
Operating Conditions	Temperature: -20° to +60° C	Relative humidity: 100% (non-condensing)
Vibration and Mechanical	All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double
Shock	amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G 11
	milliseconds duration, half sine wave.
Temperature Warmup Drift	See data sheet p/n 119287 for more information.
Application Notes	Objects passing inside the specified near limit may produce a false response.
Certifications
Hookup Diagrams	MI14 (p. 535)

LIGHT ULTRASONIC MEASURING LIGHT TEMPERATURE RADAR GAUGINGSCREENS

More information online at bannerengineering.com 271