MEASUREMENT & INSPECTION

 

 

A-GAGE®MINI-ARRAY®Sensor Specifications

Emitter/Receiver Range

9.5 mm beam spacing

 

19.1 mm beam spacing

Max range is specified at the point

Array Length 143 to 1057 mm: 0.6 to 6.1 m

Array Length 133 to 1057 mm: 0.9 to 17 m

where 3x excess gain remains.

Array Length 1210 to 1819 mm: 0.6 to 4.6 m

Array Length 1200 to 1810 mm: 0.9 to 14 m

 

 

 

 

Minimum Object Sensitivity

9.5 mm Beam Spacing

 

19.1 mm Beam Spacing

 

Straight, Edge Modes: 19.1 mm

 

Straight, Edge Modes: 38.1 mm

 

Interlaced Mode: 12.7 mm*

 

Interlaced Mode: 25.4 mm*

 

With DeviceNet Controller:

 

With DeviceNet Controller:

 

Straight, Edge Modes: 19.1 mm

 

Straight, Edge Modes: 38.1 mm

 

Skip Mode: Multiply the above by the

Skip Mode: Multiply the above by the

 

number of skipped beams, plus 1

 

number of skipped beams, plus 1

 

Interlaced Mode: 12.7 mm*

 

Interlaced Mode: 25.4 mm*

 

*Assumes sensing is in the middle 1/3 of sensing range.

 

 

Sensor Scan Time

55 microseconds per beam, plus 1 millisecond post process time per scan.

 

DeviceNet: Post process time will vary, based on the number of channels interrogated during each scan.

Power Requirements

9.5 mm beam spacing

 

19.1 mm beam spacing

Maximum current is for a 6' sensor.

12V dc ±2%, supplied by controller

 

12V dc ±2%, supplied by controller

 

Emitter: 0.10 A @ 12V dc

 

Emitter: 0.10 A @ 12V dc

 

Receiver: 0.75 A @ 12V dc

 

Receiver: 0.50 A @ 12V dc

 

 

Connections

Sensors connect to controller using 5-conductor Mini-style quick-disconnect cables (one each for

 

emitter and receiver), ordered separately. Use only Banner cables, which incorporate a “twisted pair”

 

for noise immunity. Cables measure 8.1 mm dia. and are shielded and PVC-jacketed. Conductors are

 

20 gauge. Emitter and receiver cables may not exceed 75 m long, each. See page 421.

 

 

Status Indicators

Emitter: Red LED lights to indicate proper emitter operation

 

Receiver: Green indicates sensors aligned (> 3x excess gain)

 

Yellow indicates marginal alignment of one or more beams (1x -3x excess gain)

 

Red indicates sensors misaligned or one or more beam(s) blocked

 

 

Construction

Aluminum, with black anodized finish; acrylic lens cover

 

 

 

 

Environmental Rating

NEMA 4, 13; IP65

 

 

 

 

 

Operating Conditions

Temperature: -20° to +70° C

Relative humidity: 95% at 50° C (non-condensing)

 

 

 

 

LIGHT ULTRASONIC MEASURING LIGHT TEMPERATURE RADAR GAUGINGSCREENS

More information online at bannerengineering.com

301

Page 59
Image 59
Banner L-GAGE manual GAGEMINI-ARRAYSensor Specifications, 301, Minimum Object Sensitivity, Mm beam spacing