Banner L-GAGE manual Gage QT50R Specifications

SCREENSGAUGING

RADAR TEMPERATURE MEASURING LIGHT ULTRASONIC LIGHT

MEASUREMENT & INSPECTION

	R-GAGE™QT50R Specifications
Range	Sensor will detect a proper object (see below) up to 15 m, depending on target
Effective Beam	See charts EBPC-13 and EBPC-14 on page 515
Detectable Objects	Objects containing metal or other high-dielectric material
Operating Principle	Frequency Modulated Continuous Wave (FMCW) radar
Operating Frequency	24 GHz, ISM Band (varies slightly by model and national telecom regulations)
Supply Voltage	12 to 30V dc, less than 100 mA (exclusive of load)
Supply Protection	Protected against reverse polarity and transient overvoltages
Circuitry
Delay at Power-up	Less than 2 seconds
Output Configuration	Bipolar NPN/PNP outputs, 150 mA; DIP Switch 7 selects NO (default) or NC operation
Output Protection	Protected against short circuit conditions
Indicators	Power LED: Green (Power ON)
	Signal Strength LED: Red, flashes in proportion to signal strength
	Output LEDs: Yellow (output energized)/Red (configuration)
Adjustments	Dip-switch-configurable sensitivity, sensing distance and output configuration
Construction	Housing: ABS/polycarbonate
	Lightpipes: Acrylic
	Access Cap: Polyester
Operating Temperature	-40° to +65° C
Environmental Rating	IP67
Connections	2 m, 5-conductor, shielded, PVC-jacketed cable or 5-pin Euro-style QD. Mating QD cables are ordered
	separately. See page 415.
Certifications
	and ETSI/EN 300 440 or FCC Part 15, depending on model (consult factory for other certifications)
Hookup Diagram	MI22 (p. 537)

308 More information online at bannerengineering.com