Banner L-GAGE U-GAGE T30U Specifications cont’d, Measurement & Inspection, Specified using a 100

MEASUREMENT & INSPECTION

	U-GAGE®T30U Specifications (cont’d)
Sensing Performance	Analog sensing resolution or discrete output repeatability: ±0.25% of measured distance
(Specified using a 100 x	“A” suffix models: .5 mm min
100 mm aluminum target at	“B” suffix models: 1 mm min
25˚ C under fixed sensing	Analog linearity: ±0.5% of full-scale span
conditions.)	Min. window size: 10 mm
	Hysteresis of discrete output: 2.5 mm
	Temperature effect: 0.2% of sensing distance per ° C
Adjustments	Sensing window limits (analog or discrete): TEACH-mode programming of near and far window
	limits may be set using membrane push buttons on sensor or remotely using TEACH input. Window
	limits may be programmed separately, or together.
	Analog output slope: the first limit taught is assigned to the minimum output value (4 mA or 0V).
Indicators	Four status LEDs: In RUN mode:
	Green ON Steady: Power ON, RUN mode
	Green Flashing: Discrete output is overloaded
	Red Flashing: Relative received signal strength
	Yellow analog ON Steady: Target is inside window limits
	Yellow discrete ON Steady: Output conducting
	In Program mode:
	Green OFF: PROGRAM mode
	Red Flashing: Relative received signal strength
	Yellow ON Steady: Ready for first window limit
	Yellow Flashing: Ready for second limit
	Yellow OFF: Not teaching this output
Construction	Molded reinforced thermoplastic polyester housing.
Environmental Rating	Leakproof design is rated IEC IP67; NEMA 6P
Connections	2 m or 9 m 5-conductor PVC-covered attached cable, or 5-pin Euro-style quick-disconnect fitting.
	QD cables are ordered separately. See page 415.
Operating Conditions	Temperature: -20° to +70° C	Relative humidity: 100%
Vibration and	All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60Hz max., double
Mechanical Shock	amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11
	milliseconds duration, half sine wave.
Application Notes	Objects passing inside the specified near limit will produce a false response.
	NOTE: For more information about out-of-range and signal loss response of the analog output,
	see product literature.
Certifications
Hookup Diagrams	Analog/Discrete Models: MI16 (p. 535)
	Dual-Discrete Models: MI15 (p. 535)

LIGHT ULTRASONIC MEASURING LIGHT TEMPERATURE RADAR GAUGINGSCREENS

More information online at bannerengineering.com 275