Banner L-GAGE manual GAGEQ45U Specifications cont’d, 279, Short Range Min. target size

		MEASUREMENT & INSPECTION
	U-GAGE®Q45U Specifications (cont’d)
Construction	Molded PBT polyester thermoplastic polyester housing, o-ring sealed transparent acrylic top cover, and
	stainless steel hardware. Q45U sensors are designed to withstand 1200 psi washdown. The base of
	cabled models has a ½"-14NPS internal conduit thread.
Environmental Rating	Leakproof design is rated IEC IP67; NEMA 6P
Connections	2 m or 9 m attached cable, or 5-pin Mini-style or 5-pin Euro-style QD fitting. QD cables are ordered
	separately. See pages 415 and 421.
Operating Conditions	Temperature: -25° to +70° C	Relative humidity: 100%
Vibration and	All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60Hz max., double
Mechanical Shock	amplitude 0.06", maximum acceleration 10G). Method 213B conditions H & I (Shock: 75G with unit
	operating; 100G for non-operation). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds
	duration, half sine wave.
Application Notes	Short Range: Min. target size:	10 x 10 mm aluminum plate at 500 mm
		35 x 35 mm aluminum plate at 1.4 m
	Long Range: Min. target size: 50 x 50 mm aluminum plate at 3 m
	Discrete: Enable/Disable; Connect yellow wire to +5 to 24V dc to enable sensor and 0 to +2V dc to
	disable sensor. When the sensor is disabled, the last output state is held until the sensor is re-enabled.
	The wire must be held to the appropriate voltage for at least 40 milliseconds for the sensor to enable
	or disable.
Certifications
Hookup Diagrams	MI17 (p. 536)

LIGHT ULTRASONIC MEASURING LIGHT TEMPERATURE RADAR GAUGINGSCREENS

More information online at bannerengineering.com 279