MaxTech NX-16 manual Section Six - Specifications

must use solid copper conductors and UL codes CM, CMR, and CMP are required. The computer on the network is connected via a star topology (i.e. each node is connected to a HUB, not to each other). Maximum cable length is 300' (100 m).

10Base-2 networks uses a single conduc- tor coaxial cable and BNC connectors. Use only RG-58A/U or RG-58C/U coaxial cables. Each network node is connected to the coaxial cable via a T-connector (included). The minimum distance between T-connectors is 1.6' (0.5m). The T-con- nector must be plugged directly into the network adapter (no cable is allowed between the T-con- nector and the adapter). No more then 30 connec- tions are allowed per segment and the maximum segment length is 607' (185 m). The cable must be terminated at each end by one 50-ohm terminator.

Section Six - Specifications

Network Standard:	IEEE 802.3
EthernetInterface:	ISA bus 8 or 16 bit, auto detect
Hardware Compability: NE2000
I/O address:	200, 220, 240, 260, 300, 320, 340, 360
IRQ line:	2 (9), 3, 4, 5, 10, 11, 12, 15
RAM buffer:	16 KB
Boot ROM address:	C800, CC00, D000, D400, D800, DC00
Power:	0.33A @ 5V
Temperature:	0 to 55 degrees C (Operating); -20 to 80
	degrees C (Non-operating)
Humidity:	10% to 90% (Non condensing)
Dimensions:	6.20" x 2.48"
Certification:	FCC Part 15 Class A

Drivers: Novell NetWare 3.x, 4.0, NetWare LAN WorkPlace TCP/IP, Novell LAN Analyzer for NetWare, Wollongong Path- way Access, FTP PC/TCP, NCSA TCP/IP, LAN Manager V2.1, Windows For Workgroups, IBM LAN Server 2.x, IBM LAN Support V1.2, IBM OS/2 EE V2.0, DEC Pathworks V4.x, SUN

PC-NFS, Banyan VINES V5.5, IBM TCP/IP for DOS and OS/2

10