sure that the notch on the ROM matches that on the socket (refer to Figure 2).
Figure 2
Align ROM and socket notches
2.Configure the adapter using the SETUP program to enable the Boot ROM function by selecting the appropriate address from the Boot ROM Base Address option. Refer to Section 2.3 for more information on running the SETUP program.
3.Follow the Remote Boot Workstation in- stallation procedure given in your network operating system manual (i.e. create a Boot Image on the server for Novell networks, or start remote booting services on LAN Man- ager networks, etc.).
Section Three - Driver Installation
The network operating system (i.e. Novell, LAN Manager, etc.) that you are using requires a driver to access the network adapter card. The
Maxtech
7