HOW TO USE
OPERATING THE DRYER
1LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care.
2CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the filter and remove
the lint from the last load. This will help ensure the fastest and most efficient drying performance.
3
4
TURN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs will illuminate and a chime will sound.
SELECT A CYCLE
Turn the cycle selector knob in either direction until the LED for the desired cycle is illuminated. The preset temperature, dry level, and option settings for that cycle will display.
5SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed, if desired, using the Temp and Dry Level buttons.
NOTE: Not all options or modifiers are available on all cycles. Temperature can only be adjusted on Timed Dry cycles; Dry Level is only available on Auto Dry cycles. A different chime will sound and the LED will not illuminate if the selection is not allowed.
6SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons (wrinkle guard, static shield, control lock and iron ready).
NOTE: Not all options or modifiers are available on all cycles. A different chime will sound and the LED will not come on if the selection is not allowed.
7BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be paused at any time by opening the door or by pressing the START/PAUSE button. If the cycle is not restarted within four minutes of being paused, the dryer will shut off and the settings will be lost.
8END OF CYCLE
When the cycle is finished, the chime will sound. Immediately remove your clothing from the dryer to reduce wrinkling. If WRINKLE GUARD is selected, the dryer will tumble briefly every few minutes to help prevent wrinkles from setting in the clothes.
19
