Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

4 in. (10.2 cm) heavy metal exhaust vent and clamps must be used. DURASAFE TM venting products are recommended and are available from your local Sears store or Sears Service Center.

DURASAFF M vent products can be purchased from your dealer. For further information, please call 1-800-4-MY-HOME ® (1-800-469-4663)or visit our Internet site at: www.sears.com.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, or a concealed space of a building.

Do not use an exhaust hood with a magnetic latch.

Do not install flexible metal vent in enclosed walls, ceilings or floors.

Use clamps to seal all joints. Exhaust vent must not be

connected or secured with screws or other fastening devices which extend into the interior of the duct. Do not use duct

tape.

IMPORTANT: Observe all governing codes and ordinances.

Improper venting can cause moisture and lint to collect indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wall- paper, carpets, etc.

Housecleaning problems and health problems.

Use a heavy metal vent. Do not use plastic or metal foil vent.

Rigid metal vent is recommended to prevent crushing and kinking.

Flexible metal vent must be fully extended and supported when the dryer is in its final position. Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

An exhaust hood should cap the vent to prevent rodents and insects from entering the home.

Exhaust hood must be at least 12 in. (30.5 cm) from the ground or any object that may be in the path of the exhaust (such as flowers, rocks or bushes, etc.).

if using an existing vent system, clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint. Replace any plastic or metal foil vent with rigid metal or flexible metal vent.

Typical exhaust installations

Typical installations vent the dryer from the rear of the dryer. Other installations are possible.

2

I

....

I

 

i

...................... 6

/

.................... 7

1Dryer

2. Elbow

3.Wall

4.Exhausthood

5.Clamps

&Rigid metal or flexible metal vent

7.Vent length necessary to connect elbows

8. Exhaust outlet

Optional exhaust installations

This dryer can be converted to exhaust out the right side, left side, or through the bottom.

Fire Hazard

Cover unused exhaust holes with one of the following kits:

279818 (white)

279915 (graphite)

279925 (biscuit)

Contact your local dealer.

Failure to follow these instructions can result in death, fire, electrical shock, or serious injury.

12

Page 12
Image 12
Kenmore 8519319A manual Typical exhaust installations, Optional exhaust installations

8519319A specifications

The Kenmore 8519319A is a top-of-the-line home appliance designed to elevate your kitchen experience. This refrigerator is widely appreciated for its blend of innovative technology, spacious design, and energy efficiency, ensuring both form and function.

One of the standout features of the Kenmore 8519319A is its spacious interior, which comes with advanced storage solutions. With adjustable shelves and numerous bins, it allows for maximum flexibility in organizing food items. The refrigerator is designed to accommodate varying sizes of groceries, making it ideal for families and those who love to entertain. Additionally, the shelving is crafted from durable materials that are easy to clean, providing both longevity and convenience.

Energy efficiency is another hallmark of the Kenmore 8519319A. It is Energy Star certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps lower your utility bills but also contributes to sustainable living by reducing your carbon footprint. The efficiency is bolstered by features like LED lighting, which illuminates the interior while consuming less power than traditional bulbs.

The cooling technology employed in the Kenmore 8519319A ensures even temperature distribution throughout the refrigerator. This feature is particularly beneficial for food preservation, as it helps maintain the freshness of vegetables and fruits longer than standard models. The appliance also includes a frost-free freezer option, eliminating the need for manual defrosting and making maintenance hassle-free.

Another impressive aspect is the advanced temperature control mechanism. This allows for precise adjustments to meet your specific cooling needs, whether you are storing leftovers, fresh produce, or beverages. The intuitive interface is user-friendly, making it easy to monitor and adjust settings.

Moreover, the design of the Kenmore 8519319A does not compromise aesthetics. With a sleek stainless-steel finish and modern lines, it can seamlessly integrate into various kitchen designs while maintaining a polished look.

In summary, the Kenmore 8519319A refrigerator stands out in terms of its spacious design, energy efficiency, advanced cooling technology, and user-friendly features. It not only meets the demands of modern kitchens but also enhances everyday living with its practical solutions and stylish appearance. For those in search of reliability and performance, the Kenmore 8519319A is a compelling choice that supports both busy lifestyles and eco-friendly practices.