Kenmore 9743678, 9743680, 9743679, 9744231 dimensions Electrical, continuedfrompage4

continuedfrompage4

Electrical

It is the customer'sresponsibility:

To contact a qualified electrician. To assure that the electrical

installation is adequate and in conformance with all national and local codes and ordinances.

You must have:

I/120-volt,60-Hz, AC-only, 15- or 20-amp., fused electrical supply.

i/COPPER WIRE ONLY.

We recommend:

v' a time-delay fuse or circuit breaker.

a separate circuit.

iv'use flexible, armored or non-metallic sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

use strain relief method provided with house wiring junction box or install a U.L.-listed/CSA-oertified clamp connector to the house wiring junction box. If using conduit, use a U.L-listed/CSA-certified conduit connector.

v' use Power Supply Cord Kit (Part No. 4317824) available from your Sears store or service center. Follow the kit instructions for installing the power supply cord.

If kit is unavailable, use a U.L.-listed, 16-gauge, three-conductor power

supply cord that meets all local codes and ordinances. Maximum

length of the power supply cord is 6 feet (1.8m).

a clamp connector to fit a 7/8" (2.2cm) diameter hole is required to