Kenmore 9744231, 9743680, 9743679, 9743678 Water, Drain, v usea new 12feet 3.7m maximum, You must

securepowersupplycouutu dishwasherterminalbox.

q/power supply cord must plug into a

®

mating three-prong, grounded outlet, located in the cabinet next to the

dishwasher opening. Outlet must meet all local codes and ordinances.

Water

You must have:

v' a hot water line with 20-125 psi (138-862 kPa) water pressure.

v' 120°F (49°C) water at dishwasher.

o/3/8" O.D. copper tubing with compression fitting (1/2" minimum plastic tubing is optional but not recommended).

v' a 90° elbow with 3/8" N.P.T.external pipe threads on one end.

Do not solder within 6" (15.2cm) from water inlet valve.

Drain

You must:

v' usea new 12feet (3.7m) maximum

drain hose that meets all current AHAM/IAPMO test standards and is resistant to heat and detergent.

v' have a high drain loop 20 inches (50.8cm) above the subfloor or floor.

V' connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20 inches (50.8cm) minimum above the floor.

v' use an air gap if the drain hose is connectedto house plumbing lower than 20 inches (5O.8cm) above subfloor or floor.

v' use 1/2" minimum I.D. drain line

fittings.

6