Setting Oven Controls
Setting the Clock
The 
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the time in the display will flash.
Setting Kitchen Timer
The Timer pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions
To set the clock (example below for 1:30)
1.Press 
.
2.Press 1, 3 & 0 pads to set the time of day to 1:30. Press
Start.
Changing between 12 or 24 hour time of day display
1.Press and hold 
for 7 seconds. CONTINUE holding the pad until “12Hr dAy” or “24Hr dAy” appears in the display and the control beeps once.
2.Press Clean to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAy” or “24Hr dAy”.
3.Press Start to accept the change or press Stop to reject the change.
4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
Setting Continuous Bake or 12 Hour Energy Saving
The Timer and Clean pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset
To set the control for Continuous Bake or 12 Hour Energy Saving features
1.Press and hold Timer for 7 seconds. After 7 seconds
“12Hr OFF” or “StAy On” will appear in the display and the control will beep once.
2.Press Clean to switch between the 12 Hour Energy Saving and continuous bake features. Note: “12Hr OFF” in the display indicates the control is set for the 12 Hour Energy Saving mode and “StAy On” indicates the control is set for the Continuous Bake feature.
3.Press Start to accept the change (Display will return to time of day) or press Stop to reject the change.
To set the Kitchen Timer (example for 5 minutes)
1.Press Timer.
2.Press the number pads to set the desired time in the display (example 5). Press Start. The time will begin to count down with “5:00”. Note: If Start is not pressed the timer will return to the time of day after 25 seconds.
3.When the set time has run out, “End” and “TIMER” will show in the display. The clock will sound with 3 beeps every 5 seconds until TIMER is pressed.
To cancel the Kitchen Timer before the set time has run out
Press Timer. The display will return to the time of day.
To Set Add 1 Minute Feature
The Add 1 Minute pad is used to set the Add 1 Minute feature. When the Add 1 Minute pad is pressed, 1 minute is added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the Add 1 Minute pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.
14
