Setting Oven Controls
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features
Setting Oven Lockout Feature
The Stop pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the display of the clock, the Kitchen Timer or the interior oven lights.
To activate the Oven Lockout feature
1.Press and hold Stop for 3 seconds.
2.After 3 seconds “door Loc” will appear, a beep will sound and “DOOR LOCKED” will flash in the display. Once the oven door is locked the “DOOR LOCKED” indicator will stop flashing and remain on along with the “Loc”.
To reactivate normal oven operation:
1.Press and hold Stop for 3 seconds. A beep will sound. The “DOOR LOCKED” will flash in the display until the oven door has completely unlocked.
2.The wall oven is again fully operational.
To Set the Cooktop Surface Feature
The 
pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being accidentally turned ON. This feature will only lock the cooktop.
To turn the Cooktop Lockout Feature ON:
1.BE SURE ALL surface element controls are set to the OFF position.
2.Press and hold 
until one beep is heard. If a triple beep sounds instead, check all surface elements and turn them to the OFF position and repeat this step. The Cooktop
Locked icon 
will turn ON and the cooktop controls and functions are locked out until the cooktop is unlocked.
To turn the Cooktop Lockout Feature OFF:
1.BE SURE ALL surface element controls are set to the OFF position.
2.Press and hold 
until one beep is heard (after 3 seconds). If a triple beep sounds instead, check all surface elements
and turn them to the OFF position and repeat this step. The Cooktop Locked icon 
will turn OFF and the cooktop may be used normally.
Important notes:
-Starting a
-If a power failure occurs after the Cooktop Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop features again.
Setting Temperature Display
The Broil and Clean pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.To tell if the display is set for Fahrenheit or Celsius press Broil and hold for 7 seconds. If “F” appears, the display is set to show temperatures in Fahrenheit. If “C” appears, the display is set to show temperatures in Celsius.
2.Press Clean to switch between Fahrenheit or Celsius display modes. The display will show either “F” or “C”.
3.Press Start to accept the change or press Stop to reject the change.
Setting Silent Control Operation
The Delay Start and Clean pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1.To tell if your range is set for normal or silent operation press and hold Delay Start.
2.Press Clean to switch between normal sound operation and silent operation mode. The display will show either “bEEp On” or “bEEp OFF”.
If “bEEp On” appears, the control will operate with normal sounds and beeps. If “bEEp OFF” appears, the control is in the silent operation mode.
3.Press Start to accept the change or press Stop to reject the change.
Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature has been reached, even if the control is set to silent operation.
15
