Auto Dry Cycle Modifiers
Use the Dryness Level Modifier to select dryness levels for the Auto Dry Cycles. Press Dryness Level until the desired Dryness Level setting illuminates.
The preset dryness setting is Normal when an Auto Dry Cycle is selected. You can select a different dryness level, depending on your load, by pressing Dryness Level and choosing More, Normal or Less. Selecting More, Normal or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.
NOTE: Dryness Level selections cannot be used with the Timed Cycles.
M0{e
Normal
¸¸Less
Dryness
Level
_ ,ec_,isoN
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the
Timed Cycles. Press Temperature until the desired temperature setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
High
MediumHigh
Medium
Low
ExtraLow
Air Dry
Temperature
ADJUST_TIMD CYCLES
ONtY
Air Dry
Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and
Type of Load |
| Time* | |
|
| (Minutes) | |
Foam rubber - pillows, | padded bras, stuffed toys | 20 | - 30 |
Plastic - Shower curtains, tablecloths | 20 | - 30 | |
| 40 | - 50 | |
Olefin, polypropylene, | sheer nylon | 10 | - 20 |
*Reset cycle to complete drying, if needed.
When using Air Dry
•Check that coverings are securely stitched.
•Shake and fluff pillows by hand periodically during the cycle.
•Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Dry is not available with Auto Dry Cycles.
You can customize your cycles by selecting options.
OPTIONS
Q | Drum Light |
QDamp Dry Signal
AUlO ¥cl so_lY
Wrinkle Guard 150
Drum Light
Select Drum Light to turn on the light inside the dryer drum. During a cycle, if Drum Light is selected, the drum light turns on and will remain on until DRUM LIGHT is pressed again, the door is open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing.
The DAMP DRY SIGNAL is useful when drying bedsheets/linens in a mixed load. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Auto Dry Cycles.
WRINKLE GUARD _ (30, 60, 90, 150 minutes)
WRINKLE GUARD ® helps keep wrinkles from forming when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period.
•Press WRINKLE GUARD ® to get
•Stop WRINKLE GUARD _ at any time by pressing WRINKLE GUARD ®, opening the dryer door or pressing STOR
•The Auto Dry and Timed Dry Cycles will retain the WRINKLE GUARD ® setting. For example, if you select WRINKLE GUARD ® in the Normal cycle, WRINKLE GUARD _ will be on the next time you select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD _, the dryer stops after cool down.
Cycle Signal
The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.
Press CYCLE SIGNAL VOLUME until the desired volume (Loud or Soft) is selected. On some models, press CYCLE SIGNAL to turn the Cycle Signal On or Off.
23
