Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other installations are possible.
B
A
.........i......................... F
A
A. Standard rear offset exhaust installation
B. Rear exhaust installation to right side (Part Number 8212504) or left side (Part Numbers 8544761 and
8212504).
i .... | Z |
A. Dryer | E. Clamps |
B. Elbow | E Rigid metal or flexible metal vent |
C. Wall | G. Vent length necessary to connect |
D. Exhaust hood | elbows |
| H. Exhaust outlet |
Optional exhaust installations
Venting systems come in many varieties. Select the type best for your installation.
Fire Hazard
Cover unused exhaust hole with the following kit:
8212503
Contact your local dealer.
Failure to follow these instructions can result in death, fire, electrical shock, or serious injury.
This dryer can be converted to exhaust out the bottom. If you prefer, you may contact your local dealer to have the dryer converted. This dryer can also be exhausted from the rear to either the right or left side. Optional kits for these exhaust installations are needed. Refer to the manufacturer's instructions for kit installation instructions.
C
c. Bottom exhaust installation
D.
NOTE: The following kits for alternate installations are available for purchase. For further information, please call
•Rear exhaust installation to right side: Part Number 8212504
•Rear exhaust installation to left side: Part Number 8544761 and 8212504
•Bottom exhaust installation: Part Number 8212503
•
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside.
/1
14
