Kenmore I 53.329662 65 GALLON Basic Tools, Additional, Soldering, Tools Needed When Sweat

Materials Needed

To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation.

m

EXPANSION TANKS FOR THERMAL

EXPANSION CONDITIONS AVAILABLE IN 2

GALLONS , AND 5 GALLONS CAPACITY

THROUGH LOCAL SEARS STORE OR

SERVICE CENTER.

WATER HEATER INSTALLATION KIT WITH

FLEXIBLE CONNECTORS FOR 3/4" OR 1/2"

THREADED OR COPPER PLUMBING

DRAIN PANS AVAILABLE IN 20" DIAMETER FORWATER HEATERS HAVING A DIAMETER 18" OR LESS,

24" DIAMETER FOR WATER

HEATERS HAVING A DIAMETER 22"

OR LESS AND AVAILABLE IN 28" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 26" OR LESS.

Basic Tools

You may or may not need all of these tools, depending on your

type of installation. These tools can be purchased at your local Sears store.

Pipe Wrench (2)

6 Foot Tape or Folding Rule

Garden Hose

Drill

Screwdriver

Pipe Dope or Teflon Tape

DRILL

SLOT-HEAD SCREWDRIVER

ROLL OF TEFLON TAPE (USE ON

WATER CONNECTIONS) PHILLIPS SCREWDRIVER

PiPE DOPE (SQUEEZE TUBE)

USE FOR WATER CONNECTIONS

GARDEN HOSE 6 FOOT TAPE PiPE WRENCH

Additional

Soldering

Tubing Cutters

Propane Torch

Soft Solder

Solder Flux

Emery Cloth Wire Brushes

PROPANE

TORCH

Tools Needed When Sweat

or Hacksaw

TUBING CUTTER

HACKSAW

ROLL	OF	ROLL OF
EMERY	CLOTH	LEAD-FREE	SOLDER
		SOFT SOLDER	FLUX

3/4" (19 mm) WIRE BRUSH

1/2" (13 ram) WIRE BRUSH