Brother 515 manual Phone Line or Connections, Sending Faxes

T R O U B L E S H O O T I N G A N D M A I N T E N A N C E 95

Vertical Black Lines When Receiving

The sender’s scanner may be dirty. Ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine. If the problem continues, contact the Brother dealer for service.

Phone Line or Connections

Fax Machine Does Not Answer When Called

Make sure the machine is in the correct receiving mode for your setup (either FAX, F/T (FAX/TEL) or TAD). Check for dial tone. If possible, call your machine to hear it answer. If there is still no answer, check the telephone line cord connection. Connect a standard telephone handset to the machine’s telephone jack. If there is no ringing when you call your machine, call your Telephone Company to check the line.

No Dial Tone on the Handset

Press Speaker Phone––OR––Lift the handset. If you hear no dial tone, check telephone line cord connections at the machine and wall jack. Check that the handset is connected to the machine’s handset jack. Test the wall jack with another single line telephone. If no dial tone on the wall outlet, call your Telephone Company.

Sending Faxes

Poor Transmitting Quality

Try changing your resolution to FINE or SUPERFINE (see “Setup Send” of chapter 6). Try cleaning the white pressure bar of the scanner and the glass under the bar.

Dialling Does Not Work

Check for a dial tone.

Change TONE/PULSE setting (see “Initial Setup” of chapter 4).

Check all line cord connections.

Check power cord connection.

Send a manual fax by pressing Speaker Phone––OR––Lifting the handset, and dialling the number. Wait to hear fax receiving tones before pressing Start.