Brother 515 manual Handling Incoming Calls, Vertical Black Lines When Sending

96 C H A P T E R T W E L V E

See

“For F/T

(Fax/Tel)

Mode Only”

chap. 5

Vertical Black Lines When Sending

Use your machine to make a copy. If the copy shows the same problem, the scanner area is dirty. Lift the front cover and check the document path. Clean the scanner’s white pressure bar and the glass under the tape using isopropyl alcohol and a lint-free cloth.

Handling Incoming Calls

F/T Pseudo-Ring in F/T Mode

The machine knows the incoming call is not a fax so it is signalling you to answer the telephone call. Pick up the machine’s handset or answer from an extension phone and press your machine’s Remote Deactivation Code (default setting is #51).

Transferring a Call to the Machine

If you have answered the machine’s handset, press Start, and hang up immediately.

If you answered at an extension phone, press your three-digit Remote Activation Code (the factory setting is 51). When your machine answers, hang up.

Fax Machine “Hears”Voice as CNG Tone

If your machine is set to Fax Detect ON, and it answers voice calls by trying to receive a fax, try turning Fax Detect to OFF.

Transmission Verification Report Prints “RESULT:ERROR”

There is probably temporary noise or static on the phone line. Try sending the fax again. If the problem continues, call the Telephone Company to check your phone line.