Brother 515 manual Choosing a Location

Models: 515

1 120
Download 120 pages 23.68 Kb
Page 20
Image 20
Choosing a Location

10

C H A P T E R T W O

 

Choosing a Location

Place your fax machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the machine near a telephone jack and a standard, grounded power outlet.

Avoid placing your machine in a high-traffic area. Do not place near heaters, air conditioners, water, chemicals or refrigerators. Do not expose the machine to direct sunlight, excessive heat, moisture or dust. Do not connect your machine to electrical outlets controlled by wall switches or automatic timers. Disruption of power can wipe out information in the unit’s memory. Do not connect your machine to electrical outlets on the same circuit as large appliances or other equipment that might disrupt the power supply. Avoid interference sources, such as speakers or the base units of cordless phones.

Caution

1Never install telephone wiring during a thunder storm.

2We recommend that this product be used with a surge protection device to protect the product against lightning.

3Never install a telephone jack in a wet location unless the jack is specifically designed for a wet location.

4Never touch telephone wires or terminals that are not insulated unless the telephone line has been disconnected at the network interface.

5Use caution when installing or modifying telephone lines.

6Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

7Do not use the telephone to report a gas leak in the vicinity of the leak.

8For PLUGGABLE EQUIPMENT, the socket should be located near the equipment and should be easily accessible.

Page 20
Image 20
Brother 515 manual Choosing a Location