Brother 515 manual Manual Transmission, Automatic Transmission, Manual and Automatic Fax Redial

56 C H A P T E R S I X

See

“One Touch

Dialling”

chap. 8

See “Speed Dialling” chap. 8

■	DO NOT use	• curled paper	• wrinkled paper
		• folded paper	• ripped paper
		• paper with staples	• paper with paper clips
		• paper with paste	• paper with tape attached.
■	DO NOT use	• cardboard	• newspaper, or fabric.
■	DO NOT use	• paper on which correction fluid has been used

■Make sure documents written with ink are completely dry.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the document face down in the feeder.

2 Pick up the handset and listen for a dial tone— OR—press Speaker Phone.

3Enter the fax number you want to call. (You can enter the digits using the dial pad or you can enter a One Touch or Speed Dial number.)

4When you hear the fax tone, press Start.

5If you’re using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the handset— OR—press Speaker Phone.

1Insert the document face down in the feeder.

2Enter the fax number you want to call. (You can enter the digits using the dial pad or you can enter a One Touch or Speed Dial number.)

3Press Start.

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, you can retry the number by pressing Redial/Pause.

If you’re sending a fax automatically and the line is busy, the machine will automatically redial up to 4 times (3 times for Ireland) at 2 minute intervals.