Brother 515 manual Remote Retrieval, Using the Remote Access Code, Programming the Paging Number

82 C H A P T E R N I N E

Programming the Paging Number

1Press Menu, 8, 6.

2Press Z or X until the screen displays

PAGING

3Press Set. The screen prompts you to enter your pager number.

PAG#:

ENTER & SET

4Enter your paging number up to 20 digits. This is the telephone number which your machine must call.

5Press Set.

6Press Stop to exit.

You cannot change a Paging number remotely.

Remote Retrieval

You can call your machine from any touch tone phone (or remote Group 3 fax machine set for tone) and use a Remote Access Code and other button presses to retrieve voice (and fax) messages. You can also program and change some settings for your Message Manager.

Using the Remote Access Code

1Dial your machine phone number from a touch tone phone.

2When your machine answers and beeps, immediately enter your Remote Access Code.

3The machine signals the kinds of messages received:

1 long beep—Fax message(s)

2 long beeps—Voice message(s)

3 long beeps—Fax and Voice message(s) No beeps—no messages

4The machine then prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, the machine hangs up. If you enter an invalid command, the machine beeps three times.