107
(For
➔
Check Receiving Status
Press 9 7
then for Fax message, press 1. Voice message, press 2.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press 9 8
then for Message Manager (TAD mode),
press 1.
Fax/Telephone (F/T), press 2.
Fax Only, press 3.
Exit Remote Operation
Press 9 0.
MESSAGE MANAGER
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your fax machine phone number from a touch tone phone.
2Enter your Remote Control Access Code (159) after the beep.
3The fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s)
No beeps — no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset the machine when you finish.
6Hang up.
5
1