Brother 515 manual Mute, Pause, Tone/Pulse, FAX/TEL Mode, On Hook Dialling

T E L E P H O N E ( V O I C E ) O P E R A T I O N 71

See “Select Answer Mode” chap. 5

Mute

1Press Mute/Speed Dial to put a call on hold.

2You can put down the handset without disconnecting the call.

3Pick up the machine’s handset or press Speaker Phone to release the call from hold.

Pause

Press Redial/Pause to insert a pause between digits to be dialled.

If your fax machine is connected to a PABX, you may need to insert an additional number prefix (e.g. “9”) and a “pause” before each fax or telephone number to gain access to the outside line. When you press Redial/Pause, a dash “-” will appear on the display. By storing a pause, you can create a delay of 3.5 seconds.

Tone/Pulse

If you have pulse dialling service, but need to send tone signals (for telephone banking, for example), follow the directions below. If you have touch tone service, you do not need this feature to send tone signals.

1Lift the handset.

2Press #. Any digits dialled after this sends tone signals.

3When you hang up, the machine returns to pulse dialling service.

F/T (FAX/TEL) Mode

When you share one line for your telephone and fax machine, in the F/T (FAX/TEL) mode, the fax machine can determine whether an incoming call is a fax or a telephone call.

On Hook Dialling

1Dial the number by using the dial pad or Quick-Dial keys.

2The number you are dialling, or the name you have stored for One Touch or Speed Dial is displayed on the LCD.

3Press Start.

4Pick up the handset when you hear the other end from the monitor speaker. If you press Tel before lifting the handset, the call will be disconnected (Only for FAX-515).

On the FAX-525DT, you can now speak to the party at the other end without lifting the handset when you hear the other end from the speaker. Press Speaker Phone when you finish the conversation.