Before using the CD player

Displaying CD time information

Loading CDs

Please read the following instruc- tions carefully to help prevent damage to your CD player and your CDs.

Compatible CDs

Your CD player plays standard 5” CDs and 3” CD singles and the audio portion of CDV discs and CD-G (CD plus graphics) discs.

Handling CDs

Hold a CD by its edges and center hole. Don’t touch the playing surface or attach labels or tape to either side of the CD.

Cleaning CDs

To clean fingerprints or other dirt from a CD, gently wipe it with a soft cotton cloth moving in circles outward from the center.

Storing CDs

To protect your CDs, store them in their cases. Don’t leave them in the player for a long time.

Damaged CDs

To avoid possible damage to your player, don’t attempt to play cracked or warped CDs.

Condensation

Condensation of water vapor on the pickup lens may prevent proper operation of your CD player. To eliminate the condensation, leave the player ON for several hours. Condensation may occur when:

You bring the player from a cool or cold place to a warm or humid place.

You operate a heater in the vicinity of the player.

There’s a big difference between the player’s internal temperature and the temperature of the room the player is in.

Before you transport your CD player

1Turn the player’s power ON. Don’t load any CDs.

2Wait until 5 seconds after NO DISC appears on the display.

3Turn the player’s power OFF.

You can view time information for the CD you’re playing.

Press the TIME DISP. button to cycle between:

TRACK TIME: Elapsed and remaining time of the current track.

TOTAL TIME: Elapsed and remaining time of the CD.

 

EDIT

 

 

 

 

 

 

 

OPEN/CLOSE

 

MODE

 

 

 

 

 

 

DISC SKIP

MULTIPLE COMPACT DISC PLAYER DP-R896

 

 

 

 

 

 

 

 

POWER

P.MODE

CHECK

CLEAR

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

STOP

 

 

TIME DSP

RANDOM

REPEAT

 

 

 

 

 

 

ON

STANDBY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY/PAUSE

 

 

 

 

 

 

 

 

 

/II

1Press the OPEN/CLOSE button to open the tray.

2Place a CD in one of the tray’s circular wells. While the tray is open, you can insert a CD in each of the 2 exposed wells.

3To insert more CDs, press the DISC SKIP button to rotate the tray. Insert a CD when the tray stops rotat- ing.

4When you’re done, press the OPEN/CLOSE button to close the tray.

Changing CDs

During play

1Press the OPEN/CLOSE button to open the tray.

2Change CDs in the exposed wells. If you want to put a CD in an unexposed well, press the DISC SKIP button to rotate the tray. You can’t change the CD currently playing.

When the player is stopped

1Press the OPEN/CLOSE button to open the tray.

2Change CDs in the exposed wells. If necessary, press the DISC SKIP button to rotate the tray.

22.

23.

Page 34
Image 34
Kenwood 350 manual Changing CDs