Receiving broadcast station
Tuning in to a non-preset radio station (Auto tuning, Manual tuning)
Select the tuning mode according to the radio wave receiving condition.
Auto tuning: When the receiving condition is good.
Manual tuning: When the receiving condition is poor. (Weak radio waves)
1Select the tuner input.
2Press the Tuning Mode key [AUTO/MONO key on the remote] to select a tuning type of Auto or Manual.
MAIN UNIT |
| REMOTE |
or
3Tune in to a station by pressing the 4/1 , ¡/¢ key [1 / ¡ key on the remote].
| or |
| |
To decrease | To increase | To decrease | To increase |
frequency | frequency | frequency | frequency |
÷In MANUAL mode, FM stations are received in mon- aural.
Each press of the Tuning Mode key [AUTO/MONO key on the remote] changes the tuning types.
Auto tuning : "AUTO TUNE" is displayed. The AUTO indicator lights up. (Stereo reception)
Manual tuning : "MANUAL TUNE" is displayed. The AUTO indicator goes off. (Monaural reception)
÷Normally, use the Auto tuning (stereo reception).
Auto tuning :
The next station can be received automatically every time the 4/1 / ¡/¢ key [ 1/¡ key] is pressed.
Manual tuning :
Press the 4/1 / ¡/¢ key [ 1/¡ key] repeatedly until the desired station is received. The desired station can also be received by holding the 4/
1 / ¡/¢ key [ 1/¡ key] down until its fre- quency is displayed.
÷For tuning from the main unit, perform the operation of step 2, and perform tuning while the indication “AUTO TUNE” or “MANUAL TUNE” is shown.
Preparations
section Basic
section Application
section Knowledge