Basic use method
To cancel the measurement
Turn the VOLUME knob on the main unit or press the VOLUME % / fi key on the remote control unit.
or
÷When the operations of steps 3 and 4 on page 26 are performed and the SET key is pressed after dis- play of “R. EQ CANCEL?”, measuring is canceled and return is made to the condition before start.
Memorizing the measurement (Memorizing your favorite sound º)
The Auto Room EQ settings can be stored.
It is recommended to store the settings with the operation shown on page 30.
Changing measured Room Equalizer Characteristics according to situation (ROOM
EQ MODE)
1Press the ROOM EQ MODE key on the re- mote control unit.
2Select a mode by using the INPUT SEL./ MULTI CONTROL knob. [press the MULTI CONTROL @ / # key on the remote. ]
The following mode items can be selected:
"NORMAL": This mode reproduces the sound optimized based on the measured results by ROOM EQ. Usually, use this mode.
"WIDE": Mode that you can enjoy music at a relatively wide area centering around the measured posi- tion. It is convenient, for example, when you wish to listen to music walking around room at a home party.
"NIGHT": Mode that is convenient when you wish to enjoy music with low volume at midnight. It is adjusted based on melodious sounds such as vocal and will relatively be clear sound with low volume.
÷Press the ENTER key on the remote control to end the operation.
Preparations
section Basic
section Application
The ROOM EQ MODE cannot be set when Auto Room Equalizer measuring has not been performed.
section Knowledge