Timer operation
Setting the timer program (PROG. TIMER)
Preparations
Basic section
Application section
Knowledge section
In each of PROG. 1 and PROG. 2, the timer data including the operating period and played contents can be programmed and set to be activated or deactivated.
Adjust the clock before setting the timer £
Connect the related equipment under reference to "System connections" 8~@
1Make preparations for timer.
Listening to DVD/CD |
| Listening to radio |
| Listening to external input sources |
Set a disc. | Radio stations should be preset | Set the timer for a component | ||
(Only normal playback is possible.) | beforehand. ‚ | connected to external input jacks. | ||
÷Set the POWER switch of the
÷The programs of "PROG.1" and "PROG.2" can be activated at the same time.
÷For the simultaneous programs setting, keep the time intervals of 1 minute or more between timer programs, in order to avoid time overlapping.
2Set the timer setting program number.
1Press the MODE key, turn the INPUT SEL./ MULTI CONTROL knob to select "TIMER SET". Then press the SET key.
2Select "PROG.1 SET" or "PROG.2 SET".
Switching as shown below is done each time the
knob is turned. "PROG.1 SET" "PROG.2 SET"
3 Press the SET key.
1 | L | |
30 10 5 3 1 | ||
|
R 
÷ The previously set contents are displayed. (If you do not want to change them, simply press the SET key.)
÷ When a timer setting has already been made in the selected timer, the setting will be overwritten by the new setting.