In case of difficulty

 

 

 

RC-R0507 (En/T)

Remote control unit

 

 

 

13

 

 

 

 

Symptom

Cause

Remedy

 

 

 

 

 

The backlight flashes five times during nor-

• The batteries are nearing exhaustion.

• Replace with new batteries to preserve the

 

mal operation.

 

currently registered setup information.

 

 

 

 

 

 

Subwoofer volume cannot be adjusted.

• Subwoofer is OFF.

• Turn the subwoofer ON.

 

 

 

 

 

 

Certain inputs cannot be selected using the

• No Setup codes registered at for the respec-

• Register a Setup code or Non-IR code at the

 

remote control.

tive input(s).

respective input(s).

RC3

 

 

 

 

 

Remote control operation is not possible.

• The remote control is set to a different opera-

• Press VIDEO, AUDIO, or TV to select the

 

 

tion mode.

approriate operation mode.

 

 

 

• Batteries are exhausted.

• Replace with new batteries.

 

 

 

• The remote control unit is too far away from the

• Operate the remote control unit within the

 

 

main system, controlling angle is too large, or

controllable range.

 

 

 

there is an obstacle between the receiver and

 

 

 

 

the remote.

 

 

 

 

• The audio cords and system control cords are

• Connect properly referring to “Setting up the

 

 

not connected properly.

system”.

 

 

 

• No software is loaded in the source compo-

• Place software in the source component you

 

 

nent.

want to play.

 

 

 

• An attempt is made to play a tape which is

• Wait until recording has completed.

 

 

being recorded in the cassette deck.

 

 

 

 

• The remote control has not been set to the

• Press the VIDEO, AUDIO, or TV key to activate

 

 

operation mode for the component you wish to

the operation mode for the component you

 

 

control.

want to control before operation.

RC5

 

 

• The microprocessor of the remote control

• Reset the microprocessor.

RC6

 

 

malfunctions.

 

 

 

 

 

 

 

The “MONITOR” indicator appears when

• VIDEO2/MONITOR is set to “MONITOR”.

• When the “MONITOR” indicator is displayed,

 

pressing the VIDEO key.

 

delete the preset code.

RC6

 

 

 

 

 

 

Remote Control