Changing (confirming) the operation mode
This operation lets you change the remote control operation mode without changing the input selector.
You may find this useful when you want to control one component while using another. (For example, if you want to rewind the tape deck while listening to a CD.)
This operation is also useful if you don't know the which mode the remote control is set to. Executing this operation allows you to change
Getting the most from your remote control
| ||
Preparing for automatic operations |
| 5 |
(MACRO play) | ||
The macro play function allows you to set the remote to control several components in succession. After completing this setup, you can perform a series of operations automatically. Enter the setup codes for the components you want to control beforehand.
or reconfirm the operation mode you desire.
VIDEO, AUDIO, TV
MACRO
VIDEO, AUDIO, TV
1Press the SHIFT key.
SHIFT
1Make a plan of the macro play you want to Setup.
The order of the operations may be fairly complex and you may not be remember all of the necessary commands during the setup procedure.
Use the space provided below to write down the operations in the order you are going to enter them.
• To operate a TV, start from step 2.
Go to step 2 within 3 seconds.
2Press the VIDEO, AUDIO or TV key repeatedly to display the remote control mode for the component you want to control.
SP A | L | R | CD |
|
| SW |
|
The component to be controlled is displayed in parenthesis
•Pressing any other keys after the SHIFT key cancels the shift function and sends the normal code associated with the respective key.
•The input selector does not change during this operation.
•If you press VIDEO or AUDIO key more than 3 seconds after pressing the SHIFT key, the input selector changes together with the operation mode.
3Execute the desired operations.
• See "Remote operation of other components" for a list of keys
available with each component. | RC$ |
The operation mode remains set at the component specified in step 2.
To return control to the original component, press SHIFT and then press the VIDEO or AUDIO key to return to the original control mode.
1 |
| ! |
|
|
|
|
|
2 |
| @ |
|
|
|
|
|
3 |
| # |
|
|
|
|
|
4 |
| $ |
|
|
|
|
|
5 |
| % |
|
|
|
|
|
6 |
| ^ |
|
|
|
|
|
7 |
| & |
|
|
|
|
|
8 |
| * |
|
|
|
|
|
9 |
| ( |
|
|
|
|
|
0 |
| ) |
|
|
|
|
|
•Up to 20 steps can be memorized for each macro.
•The example below shows the plan for step 4 (which occupies a total of 9 steps) :
1 | TV + SHIFT + POWER | 3 steps | |
2 | FUNCTION SHIFT + 4 | 2 steps | |
3 | VIDEO + VIDEO | 2 steps | |
4 | SHIFT + POWER | 2 steps | |
|
| ||
Total | 9 steps |
| |
•If you attempt to store more than 20 steps, the remote will output one long blink and exit the macro programming mode.
•Enter channel numbers (for the monitor TV, etc.) exactly as you would using the original remote.
2Press and hold the MACRO key until the backlight flashes twice.
Perform each of the following steps within 5 seconds.
3Press the VIDEO, AUDIO, or TV key to select the macro location. (MACRO1, 2, and 3 respectively)
• You can store up to 3 different macros, one at each key: |
| |||||||
VIDEO ="MACRO 1", AUDIO ="MACRO 2", TV ="MACRO 3" |
| |||||||
• The backlight flashes once when you select the macro location. | Control | |||||||
• Pressing a key other than VIDEO, AUDIO, or TV cancels the macro | ||||||||
| ||||||||
program mode. |
|
|
|
| Remote | |||
When VIDEO is pressed | ||||||||
| ||||||||
|
|
|
|
|
|
|
| |
| SP A | L | R |
| MACRO1 |
|
| |
|
|
| ||||||
|
|
| SW |
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Continued to next page