Kenwood BL370, BL380 manual to use your blender, before plugging in, Important - UK only, fitted

before plugging in

●Make sure your electricity supply is the same as the one shown on the underside of the appliance.

Important - UK only

●The wires in the cord are coloured as follows:

Blue = Neutral Brown = Live.

●The appliance must be protected by a 3A approved (BS1362) fuse.

Note:

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY.An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

key

blender

￿filler cap

￿locking lid

￿goblet

￿blender sealing ring

￿blender blade unit

￿power unit

￿speed + pulse control

￿cord storage

multi mill (if supplied)

￿blender sealing ring

￿blender blade assembly

￿multi mill jar

grinding mill (if supplied)

￿mill jar

￿grinding mill blade assembly grating mill (if supplied)

￿mill jar

￿grating mill blade assembly

to use your blender

Use your blender for soups, drinks, pâtés, mayonnaise, breadcrumbs, biscuit crumbs, chopping nuts and crushing ice.

1Fit the blender sealing ring ￿ into the blender blade unit ￿ - ensuring

the seal is located correctly in the grooved area.

●Leaking will occur if the seal is damaged or incorrectly

fitted.

2Screw the blade assembly onto the

goblet - ensuring the blade assembly is fully tightened ￿. Refer

to the graphics on the underside of the blade unit as follows:

- unlocked position

- locked position

3Put your ingredients into the goblet.

4Put the filler cap in the lid.

5Fit the lid to the goblet and turn clockwise to lock.

6Place the blender onto the power unit with the handle situated to the

right hand side and lock by turning clockwise until you hear a “click” ￿.

●The appliance won’t work if the blender is incorrectly

fitted.

7Select a speed (refer to the recommended speed chart).

3