Kenwood CH580 series manual to use your food chopper, before using for the first time

●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using for the first time

Wash the parts: see ‘cleaning’.

key

￿speed selector

￿power unit

￿cord grip

￿cover

￿upper knife blade

￿finger grip

￿lower knife blade

￿bowl

￿locating pin

￿bowl base

￿mayonnaise dripper (if supplied)

to use your food chopper

The knife blade unit comes in 2 parts, a lower and an upper blade.

●For coarser chopping use the lower blade on its own.

●For finer chopping or pureeing use both blades together. This will also give a faster result. To use both blades fit the upper blade onto the

lower blade and turn anti-clockwise to locate in place ￿. Take care as

the blades are sharp.

Note: After processing food, the upper blade may disengage from the lower blade. This is normal as the blade assembly is designed to be loose fitting to ease separation after

use.

1Put the bowl base on the bottom of the bowl. (This stops the bowl sliding on the work top).

2Place the unit on a clean, flat surface.

3Fit the desired knife blade assembly

into the bowl over the locating pin

￿.

4Cut the food into suitably sized pieces and place in the bowl. Larger pieces of food should be cut into approximately 1 to 2 cm pieces.

5Fit the cover and turn clockwise to lock into place ￿.

6Place the power unit onto the cover.

7Connect to the power supply and press down on the speed selector to select the desired speed. When operating the power unit, hold it firmly on the cover and bowl.

●Press the speed selector lightly to obtain speed 1.

●Press the speed selector firmly to obtain speed 2.

●Alternatively the speed selector may be pressed down for short periods of time to produce a pulsing action. This can be used to avoid over processing food.

8Operate the food chopper until the desired result is achieved.

9Switch off and unplug after use. 10Reverse the above procedure to

dismantle the unit.

important

●If preparing food for babies or young children, always check that the ingredients are thoroughly blended before feeding.

●Do not run the food chopper continuously for longer than 10 seconds. Leave to cool for 1 minute in between each 10 second operation.

●Do not operate the food chopper if the bowl is empty.

●Never operate the food chopper with the bowl filled with liquid.

●Always allow hot food to cool before processing.

3