3.Lower the front of the shelf and check to make sure that the shelf is securely in position.

Ingredient Care Center

The control for the ingredient care center adjusts the storage temperature of the pan. Cold air flows into the pan through the air duct between the freezer and the refrigerator. Setting the controls allows more or less cold air through the air duct.

To adjust the ingredient care center:

1.Choose a setting based on the item to be stored in the pan.

2.Push the button that corresponds to that setting.

3.The indicator light for that setting will illuminate to verify that the pan is ready to be loaded.

To remove and replace the ingredient care center cover:

1.Remove food from ingredient care center cover. Pull drawer out about 4" (10.16 cm). Reach under the glass shelf with both hands and lift gently upward until back of shelf is free. Tilt shelf at an angle and remove shelf from refrigerator being careful not to bump the glass.

2.Replace the cover by holding the glass shelf firmly with both hands, tilt the shelf at an angle and position it above the support rails. Place shelf gently on support rails on side wall.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.

Fresh fish or shellfish

use same day as purchased

Chicken, ground beef, variety meat (liver, etc.)

.........1-2 days

Cold cuts, steaks/roasts

3-5 days

Cured meats

7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.

Crisper and Covers

To remove and replace the crispers:

1.Slide the crisper drawer straight out to the stop. Lift the front of the drawer with one hand while supporting the bottom of the drawer with your other hand and slide the drawer out the rest of the way.

2.To replace the crisper drawer, place the drawer onto slides and push the drawer back until securely in position.

3.Carefully test the crisper drawer to make sure it has been replaced properly.

To clean the crisper covers:

1.To clean the top crisper cover, remove the ingredient care center located above it.

2.To clean the bottom crisper cover, first remove the top crisper drawer.

Covered Utility Bin

NOTE: For long-term storage, store eggs in a covered container or in their original carton on an interior shelf.

Wine Rack

To remove and replace the wine rack:

1.Remove the rack by pulling it straight out from the shelf.

2.Replace the rack by sliding it in between the shelf and the wall of the refrigerator.

12

Page 11 Page 13
Page 12
Image 12
KitchenAid BUILT-IN REFRIGERATOR manual Ingredient Care Center, Crisper and Covers, Covered Utility Bin Wine Rack
Page 11 Page 13

BUILT-IN REFRIGERATOR specifications

The KitchenAid Built-In Refrigerator is a blend of style, functionality, and advanced technology tailored for modern kitchens. Engineered to fit seamlessly into your cabinetry, this refrigerator not only enhances the aesthetic appeal of your kitchen but also offers outstanding performance. With its flush installation and customizable panel options, it can match the look of your cabinets, creating a cohesive design that elevates your culinary space.

One of the standout features of the KitchenAid Built-In Refrigerator is its advanced cooling system. It incorporates a dual cooling system that ensures optimal temperature and humidity levels for both the refrigerator and freezer compartments. This technology prevents the transfer of odors and ensures fresh, flavorful food preservation. The refrigerator also features a Produce Preserver, which utilizes ethylene gas-absorbing packets to delay over-ripening of fruits and vegetables, helping to extend their freshness.

Additionally, this model is equipped with an In-Door-Ice System, which maximizes usable shelf space while providing easy access to ice. The system is designed to keep ice readily available without impinging on the storage capabilities of the refrigerator. With its sleek design, the refrigerator also includes a water dispenser that provides filtered water at the touch of a button, further enhancing convenience.

Another technological advancement in the KitchenAid Built-In Refrigerator is the Smart Feature compatibility. With Wi-Fi connectivity, users can monitor and manage the refrigerator remotely using their smartphones. This feature allows for the adjustment of temperature settings and even alerts when the door is left open, ensuring food safety.

Energy efficiency is also a priority with this model. The KitchenAid Built-In Refrigerator is designed to meet ENERGY STAR® guidelines, helping consumers save on electricity bills while minimizing environmental impact. With a focus on durability and performance, this refrigerator boasts a robust stainless-steel finish, making it resistant to fingerprints and easy to clean.

In summary, the KitchenAid Built-In Refrigerator is an exceptional choice for those seeking a high-end appliance that combines style, innovative features, and energy efficiency. Its smart technologies, advanced cooling capabilities, and customizable options make it a must-have for discerning homeowners looking to enhance their kitchen experience.
Top Page Image Contents