Audio Adjustments
En 41
Each press of 5or ∞increases or decreases
the treble level. +6 ––6 is displayed as the level
is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press OPEN to open the front panel.
2 Press AUDIO to select Loud.
Press AUDIO until Loud appears in the display.
3 Press 5to turn loudness on.
Loudness level (e.g., Loud Mid) appears in the
display.
4 Press 2or 3to select the level.
Press 2or 3until the desired level appears in
the display.
Low (low)—Mid (mid)—High (high)
5 Press ∞to turn loudness off.
Loud OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press OPEN to open the front panel.
2 Press AUDIO to select Sub-W1.
When the subwoofer controller setting is S.W
Control:EXT, you can select Sub-W1. Press
AUDIO until Sub-W1 appears in the display.
3 Press 5to turn subwoofer output on.
Sub-W1 Normal appears in the display.
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.
4 Press 2or 3to select the phase of sub-
woofer output.
Press 2to select reverse phase and Rev.
appears in the display. Press 3to select normal
phase and Normal appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press OPEN to open the front panel.
2 Press AUDIO to select Sub-W2.
When the subwoofer output is on, you can
select Sub-W2. Press AUDIO until Sub-W2 80
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as 50 (Hz) or 125
(Hz).
3 Press 2or 3to select cut-off frequency.
Press 2or 3until the desired cut-off frequency
appears in the display.
50—80—125 (Hz)
• Only frequencies lower than those in the
selected range are output from the subwoofer.
4 Press 5or ∞to adjust the output level of
the subwoofer.
Each press of 5or ∞increases or decreases
the level of the subwoofer. +6 ––6 is displayed
as the level is increased or decreased.
Press 5or ∞until you see the desired value
displayed.
English Español Deutsch Français Italiano Nederlands
07
Section