This function plays back the tapes in both decks A and B continuously and repeatedly.
12
Relay playback
1Load cassette tapes in both decks.
1Open the cassette holders of decks A and B.
0
2Insert cassette tapes and close the cas- sette holders of decks A and B.
Deck A: | Deck B: |
Playback only. | Playback/recording |
| available. |
AB
2Determine the playback condition.
1Select the playback mode.
REV.MODE
2Select the Dolby NR mode.
DOLBY NR
3Start playback.
2 7 3
| Listening to cassette tape |
0 | 0 |
AUTO REVERSE | AUTO REVERSE |
TAPE A | TAPE B |
-ON – OFF
2 | 7 | 3 | 3 | 7 | 2 |
: Keys and control used in the operations described on this page.
÷Be sure to remove tape slack before insertion.
÷Be sure to close the cassette holder securely by pushing it.
Each press switches the indication.
1 “[” : Relay playback of two sides of tapes in decks A and
B is repeated.
2“”” : Relay playback is not available with this setting.
3 ““” : Relay playback of only one side of tapes in decks A and B is repeated.
Each press switches the indication.
1 DOLBY NR “OFF” (extinguished): Dolby NR is not used. 2 DOLBY NR “B”: Noise reduction of the ordinary type.
3 DOLBY NR “C”: Noise reduction with higher performance.
÷Select the Dolby NR mode according to the tape recording status.
÷Tapes are played in the directions indicated by their respective indica- tors on the display.
÷The playback starts with the deck the play key of which is pressed.
To Stop relay playback
Press stop (7) key of the deck that is playing.
2 
7 
3