SYSTEM CONTROL CONNECTIONS

Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.

This unit is compatible only with the [SL16] mode. The system control operation is not available if the unit is connected in the [XS-8] connection mode.

SYSTEM

CONTROL

SYSTEM

CONTROL

SYSTEM

CONTROL

SYSTEM

CONTROL

2 7 3

SYSTEM

CONTROL

System connections

7

CCRS

 

TAPE B

3

7

2

÷Do this operation after completing all connections. (Ensure that the unit is set to POWER OFF.)

1.If your amplifier or receiver does not have a system control terminal, do not connect any system control cords to the system control termi-

Notes

nals on the other components.

 

2.Do not connect system control cords to any components other than those specified by Kenwood. It may cause a malfunction and damage your equipment.

3.Be sure the system control plugs are inserted all the way in to the system control terminals.

SYSTEM CONTROL OPERATIONSRemote Control

Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.

Automatic Operation

Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.

Synchronized Recording

Lets you synchronize recording with the start of playback when recording from CD.