Timer operations

This unit incorporates a built-in timer standby function. By using an audio timer optionally available in the market, wake-up playback and unattended recording of tape can be

22 started at any time of the day. Connect the power cords of the components directry or indirectly to the timer so that their powers can be turned on via the timer.

The timer setup operation varies depending on the timer. Also read carefully the instruction manual of your audio timer.

Preparation 1Set the power switches of the components to ON.

2Set the input selector of the amplifier to TAPE.

3Make "Playback (recording) preparation".

0

(If relay playback is required, insert tapes in both decks A and B.)

Timer playback of tape

1Start playback.

2 7 3

2Adjust the volume of the amplifier.

3Rewind the tape(s) to the start position.

Audio timer

Tuner

Amplifier

(CT-405/KXF-W4030)

AUTO REVERSE

TAPE A

- ON –OFF

2 7 3

To AC outlet

AUTO REVERSE

TAPE B

3

7

2

1 ¡

4Set the TIMER switch to PLAY.

TIMER PLAY

REC OFF PLAY

5Set the timer.

÷Set the timer so that the tape starts at the desired time of the day.

÷When the set time comes, tape playback starts automatically.

÷Read carefully the instruction manual of your audio timer.

1. When connecting the KENWOOD equipment (amplifier, CD player) and the system, remove the disc from the CD player. 2. If relay playback is required, set to “[” or ““”.

Notes 3. If tapes are inserted in both decks A and B, timer playback starts with deck B.

4. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)