Convenient CD recording (Deck B only)

By connecting this unit with a KENWOOD " ", type amplifier (receiver) with a SYSTEM CONTROL jack and a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on the CD player can be started simultaneously.

20 Since this unit is not designed for recording with metal (TYPE IV) tapes, do not use metal tapes for recording.

Preparation 1Complete the connections referring to

"System connections".

6

2Make “Playback (recording) preparation”.

0

3(Load a disc in the CD player.)

CD synchro recording

1Perform auto-bias adjustment.

AUTO BIAS

0

0

AUTO REVERSE

 

 

 

 

 

 

 

 

AUTO REVERSE

TAPE A

 

 

 

 

 

 

 

 

TAPE B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-ON –OFF

2

7

3

3

7

2

: Keys and control used in the operations described on this page.

÷The optinum bias is set in about 50 seconds, after which the deck enters stop mode.

÷For a fine adjustment after setting AUTO BIAS, refer to the description

of “Bias level adjustment”.

&

÷To cancel the auto-bias adjustment operation in the middle, press the stop (7) key.

÷Recording is possible even when the auto-bias setting is ommitted.

2Adjust the recording level.

1 Play a CD.

2Set the record-pause mode.

3Adjust the recording balance

 

 

and recording level.

 

 

8PAUSE REC/ARM

 

 

Press the 6 key

 

 

 

of the CD player.

 

“How to record.”

^

÷While pressing the PAUSE (8) key, press the REC/ARM () key.

3Set the record-pause mode.

4Put the CD player in stop mode.

Press 7 key of the

CD player.

8PAUSE REC/ARM

÷While pressing the PAUSE (8) key, press the REC/ARM () key.

4Start playing the CD.

Press the 6 key of the CD player.

÷Synchro recording is not possible when tracks of more than one CD are programmed using a Carrousel type CD player.

÷Recording starts at this moment.

÷When the CD player has completed playback, the cassette deck stops recording and enters the stop mode.

To pause

: Press the 6key of the CD player.

To restart recording

:

Press the 6key of the CD player.

To stop

:

Press the 7key of the CD player.

÷If the stop (7) key of the cassette deck is pressed, the cassette deck enters the stop mode but the CD player does not stop.