Mechanical data:
Shape | "Beveled teardrop" |
|
|
Color | Black |
|
|
Dimensions | 95mm x 70mm x 38mm (approx) |
|
|
Weight | 150 grams (5.25oz) (excl. cables) |
|
|
Cables | 4 meters (13 feet) micro low loss |
|
|
Connectors | 2 x FAKRA / SMB (keyed per |
|
|
Mounting | Acrylic foam adhesive pads |
|
|
Cover | Impact resistant glass filled nylon (paintable) |
|
|
Electrical data:
Sirius | Per specification Sirius |
|
|
Peak Gain (SAT) | 6 dBic |
|
|
3 dB beam width (SAT) | 130 degree |
|
|
4 dB beam width (SAT) | 140 degree |
|
|
Noise figure (SAT) | 0.7 dB |
|
|
Peak Gain (Ter.) | 6 dBi |
|
|
Noise figure (Ter.) | 1.1 dB |
|
|
General Instructions
Satellite antennas are extremely sensitive and finely specified to facilitate reception of satellite signals under a variety of conditions across the whole of North America. It is important to read these instructions carefully to ensure that the antenna is mounted properly in the best location in order to provide optimum reception quality.
Mounting location
The satellite antenna should be mounted horizontally on a metal surface measuring at least 18 inches by 18 inches. The best reception quality is achieved at the high- est point of the vehicle (i.e. the roof) but the trunk lid is an alternate location for convertibles and for some sedans.
It is important that the antenna has a clear "view" to the satellites and
Mount the antenna this far away | From an obstruction this high |
12" | 4" |
18" | 6" |
24" | 8" |
30" | 10" |
|
|
(Glass sunroofs, which open outwards and cover the rear roof area, should not affect the location of the antenna module).
Installation temperature
Installation should be carried out when conditions are at room temperature or above. Firstly, colder temperatures could affect the curing time of the antenna mod- ule's adhesive. Secondly, when mounting the antenna module on a sedan, it will be easier to work with the rubber molding around the window.
4
